Category: Wire Rope Socket

Rope Pear Sockets|SO4 CR Socket|Short Bow Socket Rope Pear Sockets are also known as SO4 CR Socket, Short Bow Socket. Like the Wedge Socket, Spelter Socket, Swage Socket, The pear sockets are used in anchor lines for temporary mooring between the chain and wire rope. It's made from high tensile cast steel and tempered for maximum strength. The molded wire can't turn out of the cone during use. Material: High Tensile Cast Steel. Finish: hot dipped galvanized, Painting or upon request. Temperature Range: -20°C up to +200°C. Use at higher temperatures possible with reduction of WLL. Standard: Federal RR-S-550/EN 13411-6. Sockets are proof loaded at 40% of the MBL up to an MBL of 875 Mtons. Packing: Carton with pallet. Bespoke sizes are available. Applications: lifting, rigging, towing and constructions. INQUIRE…

Closed Wedge Socket|Wire Rope Wedge Sockets Closed Wedge Socket is used as the wire rope end terminations to attach the wire to a fixed point. Compared with mooring spelter poured socket, the installation of wedge sockets will be easier by pushing back the wedge, and then the rope will be reeved. The closed wedge & basket will be quenched & tempered for maximum high tensile strength of the cast steel. Material: Cast alloy steel with high mechanical properties. Finish: hot dipped galvanized, Painting or upon request. Temperature Range: -20°C up to +200°C. Use at higher temperatures possible with reduction of WLL. Standard: Federal RR-S-550/EN 13411-6. The efficiency of a 6 and 8 strand wire rope/wedge socket connection is 80% of the minimum breaking load of the wire but limited to the…

Closed Spelter Socket| Wire Rope Spelter Sockets S/G-417 Closed Spelter Socket is used for wire rope connection. Spelter poured socket installation will be easy to handle than wedge sockets. The sockets are made from high tensile steel for maximum holding strength. Spelter socket terminations fit for wire rope(dia from 6mm to 167mm) of 6 x 7, 6 x 19 or 6 x 37, IPS or XIP (EIP) , XXIP (EEIP), RRL, FC or IWRC. Material: high tensile steel Finish: hot dipped galvanized, Painting or upon request. Temperature Range: -40°C up to +200°C. Standard: Federal Specification RR-S-550E/EN 13411-6. Easy for installation. Packing: Carton with pallet. Rope Sizes: 1/4 to 4", or 6 to 102mm.  Bespoke sizes are available. Applications: Attaching steel wire rope. INQUIRE Specifications: [table id=104 /] Notice: All cast…

Open Wedge Socket|Wire Rope Wedge Sockets S-421T Open Wedge Socket is a wire rope termination with a cotter. The sockets are made from high tensile cast steel. It's also known as wedge lock wire rope end fittings for lifting, which is easy to be installed with a torque wrench. The wedge sockets have high strength. The socket is suitable for two different ductile iron wedges at least to fit for more than one rope size. Material: high tensile steel Finish: hot dipped galvanized, Painting or upon request. Temperature Range: -20°C up to +200°C. Standard: Federal RR-S-550/EN 13411-6. Wedge Socket Pins: Threaded end for nuts/Cotter, safety bolt, nut and cotter pin for choices. Packing: Carton with pallet. Rope Sizes: From 7mm to 86mm.  Bespoke sizes are available. Applications: Attaching steel wire…