by
Bolt type Chain Shackle|Safety Bolt Pin D/Dee/Anchor Shackles

Bolt type Chain Shackle|Safety Bolt Pin D/Dee/Anchor Shackles

Shackles
Bolt Type Chain Shackle|Safety Bolt Pin D/Dee Shackles|Anchor Shackles Bolt Type Chain Shackle is D/Dee Shackles with safety bolt pin. It's used as anchor shackles & lifting shackles. The safety bolt pin has a nut and cotter pin which makes the D shackles more secure than screw pin shackles. It's drop forged with carbon steel and alloy pin, quenched & tempered, meets Federal Specification RR-C271E. Sizes from 0.5T to 85T can bespoke. Features: Material: Carbon Steel for shackle body, Alloy pins for safety bolt pins. Sizes: Dia 1/2 to 85 tons. Heat Treatment: Quenched &Tempered. Finish: Hot Dip galvanized or Self Colored. Breaking Load: 6 times Working load. Applications: Lifting, Cable Tension, Mooring, Pull testing. Meets or exceeds all requirements of ASME B30.26, Federal Specification RR-C271E Type IVB, Grade A, Class 3. Approved for…
Read More
by
Forged Screw Pin D Shackle|Anchor Shackles|Chain Shackles

Forged Screw Pin D Shackle|Anchor Shackles|Chain Shackles

Shackles
Forged Screw Pin D Shackle|Anchor Shackles|Chain Shackles Drop Forged Screw Pin D Shackle is also called Dee Shackles, Anchor Shackles, Chain Shackles. It's drop forged, quenched & tempered to make the shackles maximum tensile strength which will reach grade 6. The chain shackle body is high tensile carbon steel and the screw pin is alloy pins. The anchor chains will be hot-dip galvanized. The sizes from 1/2 to 55 tons. Features: Material: Carbon Steel for shackle body, Alloy pins for Screw pins. Sizes: Dia 1/2 to 55 tons. Heat Treatment: Quenched &Tempered. Finish: Hot Dip galvanized or Self Colored. Breaking Load: 6 times Working load. Applications: Lifting, Cable Tension, Mooring, Pull testing. Meets or exceeds all requirements of ASME B30.26, Federal Specification RR-C271E Type IVB, Grade A, Class 3. Approved for use at -40…
Read More
by
Swage Dome Head Terminal|Button Head Terminals AISI316

Swage Dome Head Terminal|Button Head Terminals AISI316

Wire Rope Terminals
Swage Dome Head Terminal|Button Head Terminals AISI316 Swage Dome Head Terminal is also called cone head terminals, button head terminals. The swage terminals are made from A4-AISI316 marine grade stainless steel which makes the domehead maximum corrosion resistance & durability. The dome head terminal has to be swaged or crimped with the hydraulic swaging tool for use. Sizes: 3mm, 4mm, 5mm, 6mm. Material: Stainless Steel 316, 304 Solid bar. Finish: Polished. Features: AISI316 Stainless steel is marine grade due to its good performance of corrosion resistance. Suitable for use with rotary & fixed die swaging machine. Use with 1×19, 7X19,7X7 Strand, and compacted strand Metric and inch wire rope (IWRC). Applications: Sails boats, yacht rigging, masts, spreaders, architectural, Structural systems, cable railing, balustrade, and etc. INQUIRE Specifications: [table id=64 /]…
Read More
by
Swage Eye Terminal|Swaged Eye|Stainless Swage Eye SS316

Swage Eye Terminal|Swaged Eye|Stainless Swage Eye SS316

Wire Rope Terminals
Swage Eye Terminal|Swaged Eye|Stainless Swage Eye SS316 Swage Eye Terminal is made of 316 Stainless Steel. The Swage Eyes are used as an attachment to rigging screws or forks in yacht rigging and architectural applications. The Grade 316 steel makes the swaged eyes maximum corrosion resistance and durability. The terminals are designed for use with 1X19, 7X19, 7X7, and compacted strand stainless steel wire rope and can be installed with swaging machines easily. Material: Stainless Steel 316, 304 Solid bar. Finish: Polished. Features: AISI316 Stainless steel is marine grade due to its good performance of corrosion resistance. Suitable for use with rotary & fixed die swaging machine. Use with 1×19, 7X19,7X7 Strand, and compacted strand Metric and inch wire rope (IWRC). Applications: Sails boats, yacht rigging, masts, spreaders, architectural, Structural systems,…
Read More
by
Swage Toggle Terminal|Swage Toggle Jaws/ Fork SS316

Swage Toggle Terminal|Swage Toggle Jaws/ Fork SS316

Wire Rope Terminals
Swage Toggle Terminal|Swage Toggle Jaws/ Fork SS316 Swage Toggle Terminal is made from AISI316 Stainless Steel to get maximum corrosion resistance and durability. Toggles design will eliminate the bending and strain of the wire rope. The toggle fork will make the rope to bend back & forth flexibly. So the toggle terminals are the best choices to minimize the fatigue risk due to sideway loading. Sizes from 3mm to 26mm are available. Material: Stainless Steel 316, 304. Finish: Polished. Features: AISI316 Stainless steel is marine grade due to its good performance of corrosion resistance. Suitable for use with rotary & fixed die swaging machine. Use with 1×19, 7 Strand, and compacted strand wire rope (IWRC). Unique toggle action for articulation in two planes Applications: Sails boats, yacht rigging, architectural, Structural…
Read More
by
Stainless Steel Swage Fork|Swage Marine Jaw|Fork Terminal

Stainless Steel Swage Fork|Swage Marine Jaw|Fork Terminal

Wire Rope Terminals
Stainless Steel Swage Fork|Swage Marine Jaw|Fork Terminal Stainless Steel Swage Fork Terminals with clevis pin are made of AISI316 grade stainless steel for maximum corrosion resistance and durability. The terminals will fit wide ranges of wire rope from 3mm-26mm. The fork head is welded on the swage terminal body and then polished. We also manufacture swage terminals of swage studs, swage eyes, swage toggles, swage rigging screws. Material: Stainless Steel 316, 304. Finish: Polished. Features: AISI316 Stainless steel is marine grade due to its good performance of corrosion resistance. Applications: Sails boats, yacht rigging, architectural, Structural systems, cable railing, balustrade, and etc. Packing: Plastic bag inside, Carton outside with pallet. Sizes: 3mm-26mm. For bespoke sizes, contact us for further discussion. INQUIRE Specifications: [table id=61 /] Add Your Heading Text Here…
Read More
by
Stainless Steel Swage Stud|SS316 Swage Thread Terminal

Stainless Steel Swage Stud|SS316 Swage Thread Terminal

Wire Rope Terminals
Stainless Steel Swage Stud|SS316 Swage Thread Terminal Stainless Steel Swage Stud has right-hand & left-hand thread. Both UNF & Metric thread is available. The swage stud thread terminal will fit 3mm-16mm wire rope. It's easy to be swaged or crimped to ropes by hand. The material of grade 316 stainless steel makes it has excellent resistance to corrosion. It's a good choice for yacht rigging, construction, balustrade use. Material: Stainless Steel 316, 304. Finish: Polished. Thread: Left hand or Right Hand, Metric or UNF thread. Features: AISI316 Stainless steel is marine grade due to its good performance of corrosion resistance. Applications: Sails boats, yacht rigging, architectural,Structural systems, cable railing, balustrade, and etc. Note: The parameters in the form are for metric threads of right hand & left hand. UNF thread…
Read More
by
Bow Shackle with Screw Pin|Chain/Anchor Shackles

Bow Shackle with Screw Pin|Chain/Anchor Shackles

Shackles
Bow Shackle with Screw Pin|Chain/Anchor Shackles Bow Shackle with Screw Pin is also called screw pin chain shackles, anchor shackles, which is made from forged carbon steel shackle body & alloy steel pin. It's quenched & tempered, hot-dip galvanized for the max strength and corrosion resistance. The shackles are used in marine, lifting, towing, fishing, tie-down, agriculture. Sizes from 1/3 ton to 55 ton and can bespoke. Features: Material: Alloy Steel Pins & Carbon Steel Body. Nominal Sizes: 3/16" to 2-1/2". Heat Treatment: Quenched &Tempered. Fatigue rated: 1/3-55 Ton. Applications: Lifting, Cable Tension, Mooring, Pull testing. Approved for use at -40 degree C (-40 degree F) to 204 degrees C (400 degrees F) Meets or exceeds all requirements of ASME B30.26. Finish: Hot Dip galvanized or Self Colored. Breaking Load:…
Read More
by
G-403 Jaw End Swivels|G403 Chain Swivels

G-403 Jaw End Swivels|G403 Chain Swivels

Swivels
G-403 Jaw End Swivels|G403 Chain Swivels G-403 Jaw End Swivels are made of alloy steel, quenched & tempered. It allows the load to rotate to avoid twisting of the chains & ropes. The Swivels are hot dip galvanized for corrosion resistance & durability in various applications. G403 chain swivels are positioning devices and are not intended to rotate under load. For load swivels, see ball bearing swivels. Material: Alloy steel. Heat Treatment: Quenched & Tempered. Process: Drop forged Chain swivels with out bearing. Standard: According to Federal Specification RR-C-271F. Safety factor: 5:1 . Finish: Hot dip Galvanized. Note: The swivels are positioning devices and are not fit for rotating under load. For load swivels, ball bearing swivels will be better. INQUIRE Specifications: [table id=50 /] Contact us: Send us your…
Read More
by
Stainless Steel Quick Release Pelican Hooks with Ring/Slide

Stainless Steel Quick Release Pelican Hooks with Ring/Slide

Pelican Hooks
Stainless Steel Quick Release Pelican Hooks with Ring/Slide The Quick Release Pelican Hooks are pelican hooks with ring or slide. It's made of A4-AISI 316 stainless steel to be resistant to corrosion in marine applications. The pelican hook is shaped like a pelican's beak. The long arm of the pelican hook provides powerful lever for tensioning. It can be can be quickly secured or released by a sliding ring. Sizes: 100mm, 150mm for choices. Material: Stainless Steel 316, 304. Finish: Polished. Features: AISI316 Stainless steel is marine grade due to its good performance of corrosion resistance. Sizes: 100mm, 150mm or 4", 5-3/4". Applications: Sails boats, yachts, cable railing, lifelines, and etc. Packing: Carton with pallet. Bespoke sizes are available. INQUIRE Specifications: [table id=57 /] Contact us: Send us your requests…
Read More